Driveways · Patios · Walkways

Concrete Cleaning & Sealing in East Brainerd & Hixson

Clean the surface, then choose a sealer that helps it take on less water. Request a quote for your outdoor concrete from Under Pressure Pressure Washing.

Serving East Brainerd, Hixson and Ooltewah.

Outdoor Concrete, Cleaned & Ready to Seal

Driveways

Ask for cleaning and a water-repellent treatment suited to your concrete. Include any oil stains or old coatings in your request.

Patios

Share the size, surface finish and any existing treatment. Ask how the proposed sealer will affect the appearance.

Walkways

Include front paths, sidewalks and connecting concrete areas. Ask when you can walk on the treated surface again.

A Look at the Process

Preparation, product choice and drying time depend on the concrete and the weather. Ask for the proposed process with your quote.

AI-generated process illustrations, not Under Pressure job photos.

  1. Illustration of gloved hands measuring and assessing a concrete driveway
    Inspect the Surface — Check the concrete’s condition, previous coatings and areas to include.
  2. Illustration of a worker using a wheeled surface cleaner on a concrete driveway
    Clean & Prepare — Remove contamination with a method suited to the concrete, then allow drying as required.
  3. Illustration of a worker applying a clear treatment to concrete with a low-pressure sprayer
    Apply & Allow to Cure — Follow the selected product’s directions and keep traffic off for the required time.

Concrete Cleaning & Sealing, Step by Step

Use these steps to discuss the work with Under Pressure. The selected product and your concrete determine the final method.

  1. Check the Surface

    Review the finish, cracks, previous treatments and the appearance you want. Confirm which areas and preparation the quote covers.

  2. Clean & Prepare

    Remove dirt and contaminants that could block penetration. Assess old coatings and curing compounds before selecting the preparation method.

  3. Allow Drying Time

    After cleaning, check moisture and the weather against the product requirements. Drying time is part of the schedule.

  4. Test a Small Area

    Check absorption and appearance on a prepared patch. Allow the test to dry or react as instructed before assessing the result.

  5. Apply the Sealer

    Use the selected product’s application method and coverage. Handle excess material as directed, and protect neighboring surfaces.

  6. Protect & Let It Cure

    Keep rain and traffic off for the required period. Get clear instructions for walking, parking and returning furniture before the contractor leaves.

Manufacturer instructions differ. Preparation, testing and application examples are in the W. R. Meadows water repellent data sheet (PDF), PROSOCO Saltguard WB data sheet (PDF) and EUCO-GUARD 100 data sheet (PDF). These are reference examples; Under Pressure confirms the product for your job.

How Your Quote Works

  1. Describe the Concrete

    Send your location, approximate size and what you want cleaned and sealed through the quote form.

  2. Review the Proposed Work

    Under Pressure checks the surface and confirms preparation, product, finish and price with you.

  3. Agree on the Schedule

    Confirm the weather window and when the concrete can be used again before booking the work.

Concrete Sealing Questions

What does a concrete water repellent do?

A suitable penetrating water repellent reduces water absorption while allowing moisture vapor to escape. Ask Under Pressure which product suits your concrete and what it protects against. Water repellency is different from repairing cracks or fixing drainage.

What is the difference between concrete cleaning and sealing?

Cleaning removes surface dirt and contaminants as part of the preparation. Sealing is a separate treatment applied after the surface meets the product’s requirements. Your quote should say whether it covers cleaning alone or both cleaning and sealing.

Can you clean and seal my driveway in one visit?

Separate visits may be needed for drying and suitable weather. Ask how the proposed product’s moisture requirements will be checked after cleaning. Confirm the expected visits with your quote rather than assuming the sealer can follow the wash immediately.

Will sealing make my concrete glossy?

The finish depends on the product. Some penetrating water repellents are intended to keep a natural appearance. Tell Under Pressure the look you prefer and ask to review a small test area before the whole surface is treated.

Can concrete that was sealed before be treated again?

The previous product matters. An existing coating or sealer may prevent a new penetrating treatment from soaking in, and removal may be needed. Share any old invoice or product name; if it is unknown, include that in your request.

How soon can newly poured concrete be sealed?

Give Under Pressure the pour date and any curing product used. Minimum concrete age and preparation vary by sealer. The selected manufacturer’s instructions should determine when the surface is ready.

What happens if rain is forecast?

Sealers have product-specific temperature, moisture and rain-free requirements. Ask which weather conditions would move the appointment and how the treated surface will be protected. The planned application needs a suitable weather window.

When can I walk or park on the concrete again?

Ask for separate walking and vehicle-use times for the selected product and conditions. A surface that feels dry may still need more time before use. Arrange parking and access before application, then follow the contractor’s return-to-use instructions.

Will a water repellent prevent oil stains?

Do not assume water repellency includes oil resistance. Some penetrating concrete sealers specifically do not prevent oil stains. Ask what the proposed product covers, and describe existing oil marks so cleaning expectations are clear.

Will a sealer repair cracks or stop a basement leak?

Sealing does not replace crack or structural repairs. This quote request is for outdoor concrete such as driveways, patios and walkways. Tell Under Pressure about damaged areas; basement leaks and below-ground waterproofing need a different assessment.

What affects the price of concrete sealing?

Area, condition, cleaning, existing coatings and the selected product affect the quote. Share your ZIP code, approximate size and previous treatments. Ask whether preparation, any coating removal and the sealing application are included in the written price.

Who receives my quote request?

Your concrete cleaning and sealing request goes to Under Pressure Pressure Washing. They confirm the surface, service area, price and schedule with you before any work is booked.

Concrete Sealing Around East Brainerd & Hixson

Request a quote for a driveway, patio or walkway in East Brainerd, Hixson or nearby Ooltewah. Include your location so Under Pressure can confirm service for your property.

Need the rest of the exterior cleaned too? Read about house washing or return to the East Brainerd House Washing home page.

Get a Quote for Your Concrete

Tell Under Pressure what you want cleaned and sealed, and where the property is.

Request a Concrete Sealing Quote
Text Us (423) 556-9801